Review – Zebra F-701 Ballpoint

For quite some time now, my go-to ballpoint pen has been the Zebra F-301. I carried one around with me every day and have one in each of my various bags. To me, they are a very good compromise between writing performance, durability, availability, and expense. But recently I managed to crack off the plastic grip in my daily carry pen (in quite the unremarkable way, I just fidgeted with it too much and was popping the threads) and even though it is a problem that I’m not likely to replicate in the future, it set me on a quest to find an all-metal replacement that won’t have a similar problem. I’ve been fairly happy with other Zebra products in the past (with the exception of their fountain pen) and I ended up finding the “upgraded” version of the pen I was currently using, the F-701. This all stainless-steel pen with a knurled grip is supposed to be durable, elegant, and precise. Does it live up to its own advertising?

The body of this pen looks simple even when compared to the already minimal F-301. A 3/8ths tubular body uses more than 4 of the pen’s overall 5 ¼ inches in length. The last inch or so from the tip is very finely knurled to form the grip section, after which is a stainless-steel cone with some cosmetic step-downs. This cone screws off, providing the only access to the refill or inside the pen at all, allowing you to see that the walls of the body are about 2mm thick. On the other side of the pen there is a highly polished clip in the bent-spring steel fashion with “ZEBRA” and “F-701” stamped into it that is joined to the top of the barrel with the only bit of exposed plastic on the pen. Above this is a clicker button, which is, in fact, a plastic plunger with a metal sheath. You can theoretically remove this sheath, but there is no reason to (it doesn’t give you access to anything) and it doesn’t look like it will come off under normal conditions.

The refill is exactly the same as the refill for the F-301, which means it is fantastically smooth for a ballpoint, with a black that’s dark enough and generally resistant to wear (I believe you could also swap in one of their gel refills if that’s more your thing). This smoothness is added to by the weight of the pen, which is almost twice that of the 301, and it really shrugs off the common complaint that ballpoints require too much pressure to write with comfortably. I can write in cursive with one of these pens as fast and as easily as I could with any of my fountain pens and I get the benefit (or detriment) of that thin, precise line.  The clip is almost identical to that of the 301, but it seems to be attached more securely and doesn’t have as much of a problem with bending away and losing its grip over time (but this is still an area that can be improved: I wouldn’t clip on anything thicker than a piece of fabric). The knurling on the grip is superb, completely removing any slipperiness while being fine enough to not dig into the skin to be noticeable. This, combined with the larger size, will probably be good news for anyone who has cramped up trying to hold onto the 301 series. And finally, the click mechanism is very smooth with a nice amount of back pressure. Despite claims that it is “silent” there is still a noticeable click, but it is much less satisfying. The overall mechanism feels much more structurally sound and is nicer but ever-so-slightly more difficult to push.

I would consider the 701 an upgrade in almost every way. It is heavier, thicker, and more expensive. But the all-metal body is (even more) rugged, and the feel of the writing experience from click to page is smooth and seamless. My complaints are limited to the clip still being a problem if bent out even just a little, and the habit the shiny metal body (especially the polished clip) has of collecting scratches (some people might also be displeased about the grip being not-grippy enough for them, or the body feeling cold/heavy because of its metal construction). For the price, I’d say this is the best you could do for a ballpoint, and I might even go so far as to put it up as one of the best ballpoints I’ve ever used.

Review – Zebra SL-F1 Collapsible Pen

Earlier this year, my Fischer Space Pen Stowaway finally had the accident I was worried it might all along (the two halves of the pen became separated, and now I only have a cap). So, I needed to acquire some new small, daily carry pen. The choice wasn’t particularly difficult, my go-to ballpoint pen company, Zebra, has been making a collapsible pocket pen for some time and previously I simply never had an excuse to buy it. But, now that it’s in my hands, does it actually hold up?

When retracted the pen is absolutely tiny at just over 3¼ inches long. The rear part of the pen is a cylinder 7mm in diameter and just under 2 inches long. At the top of this tube is a flat chrome finial with a simple chrome clip extending just beneath it. At the other end of the tube is a slight polished step-down that leads to a smaller tube, at the end of that is a similar step-down leading to a polished metal cone. Grabbing the smaller tube and pulling forward slides it out from the larger tube about an inch. This action also retreats the cone a quarter inch into the pen and pushes the point of the pen out of the end (leaving you with an overall length of 4¼ inches). Both of these cylinders are constructed of metal with a matte black finish applied, and the only markings are the word “zebra” written in silver near the bottom of the larger barrel.

The retraction and extension method is a bit clunky and sticky, but it is very solid feeling and doesn’t show signs of failing anytime soon. The only potential problem I can see is that you need to be holding the tube that extends in order to write or the whole thing collapses back up again. The fine, .7mm ballpoint tip is, like all of Zebras refills incredibly smooth for a ballpoint while still having minimal skipping issues and providing a consistent and dark line (it writes almost identically to their standard refills for the “F” ballpoint series, but is a smaller, specialty refill). The extension of the pen is just enough to place it in the crook of most hands, allowing for it to be supported when writing, but the barrel/grip section, even for a lover of thin pens like myself, is small enough that your hand will cramp up over longer writing sessions (but this pen obviously wasn’t meant for that).

If you’re looking for a pen that maximizes space while still being rugged and usable, this is a definite winner. The metal construction is hardy, while the extending feature is handy. It is easy to refill by screwing out the front cone (preferably when collapsed) but remains safely in one piece throughout normal use. The clip is very grippy and sturdy while not being sharp or prone to rip fabric, and its situations so near the top allows for deep carry with very little sticking out above to get caught or seen (though this is actually a problem for where I use it, as I have a hell of a time getting it out of the loop I’ve stored it in on my belt pouch. Something like that shouldn’t be an issue for most people). The writing is very nice and smooth with a permanence suitable to most people even though it can’t write upside down or underwater. And the price, while certainly higher than most ballpoint pens, is not going to break the bank.

Review – Zebra DelGuard (0.5)

At first glance, the Zebra DelGuard looks like the popular Uni Kuru Toga and offers a similar lead-break-reducing feature (though without the point protection). The clear plastic section is molded with a similar grip and the body is black-ish and slightly thicker than the average mechanical pencil. Inside, though, is what appears to be a much simpler spring-mechanism that promises to keep your lead from snapping. Does it really do enough?

The body is a simple, matte-black tube with a small logo just before the center-band. On the back is an attached clip with some printed information, and a chrome click-button cover that easily slips off to reveal a thin, white eraser that easily pulls out to reveal the lead tube. The (grip) section is a black, translucent, and slightly slippery-feeling plastic with some ridges for grip and a slight slope down to a small metal lead pipe.

Performance of the main features of (mechanical) pencils is good but not outstanding. The clip holds well and doesn’t rip fabric; the eraser removes marks handily with minimal shavings (and a little bit of smear); and the lead is average verging on soft (it is fairly smooth and I like the .5 size). The actual DelGuard system is a bit more dubious to me, though. It’s basically a few springs that allow for a huge range of vertical motion for both the lead and the lead pipe. This means that if the user bears down vertically on up to a few clicks-worth of lead it will simply retreat into the pencil and not break, even with a considerable amount of force. Unfortunately, I write/draw at an angle, and that is apparently extreme enough to mean the lead will snap with an amount of pressure I usually associate with a lead snapping, since the system only relieves pressure vertically. This isn’t really an issue for me; I write/draw softly enough that lead breaking isn’t something I worry about. But it has the same problem for me that the Kuru Toga has; that is, with my writing style, the system doesn’t work, making it completely pointless. This pencil could not have its cushioning springs and be exactly the same experience for me.

So, as a pencil, it’s a good writer that might be moderately overpriced (it’s more expensive than the Kuru Toga). I’ve gotten other pencils with a similar writing experience for a similar price, but this is nothing special and I personally wouldn’t get it over less-expensive Zebra models, especially since the grip doesn’t feel too good in my hands; I haven’t had it actually slip, but it just feels slippery. If you really have a serious problem with your leads breaking, this might be worth looking into, otherwise it’s just a tossup with similar models.

Mini Review – Zebra 1.6mm Bold (F-301)

The Zebra F-301 is my favorite pen. It might not be the best pen I’ve ever used, but it is sturdy, good-looking, and reliable. Recently I was grabbing some new ones and mistakenly picked up the Bold 1.6mm version. As some of my readers may know, I’m more of a fine-tip person, so I had to go back and get another set. But a broad tip still has its place. In many cases it can make the writing process smoother, prevent hand cramps, and make the final product more legible. So how well does this version work?

The body is no different than the regular Zebra F-301 (save having “1.6mm” printed on the side) and it does not affect the function of the pen in that regard. The only real difference is the tip, which is considerably larger (being more than twice as big as the “fine” and half-again as big as the “medium”). The ink hasn’t been adjusted for the size, as becomes evident when the pen is left for a time and the tip dries. However, aside from minor startup problems resulting from that dry ink, the pen is remarkably smooth, especially if one has a firm hand.

If you’ve ever found yourself frustrated with the small size or stiff writing of a standard ballpoint, but still want the general water-fastness and convenience of one, this might be the pen for you. It’s a thick-line (thicker than I personally like), smooth-writing pen in a solid shell.

Review – Zebra M-301 Mechanical Pencil

The Zebra F-301 is one of my favorite and most hardy ballpoint pens. I’ve used one for a long time, and they have a good record for staying together. But Zebra has several other writing utensils in their “301” line, one being the still-very-popular M-301 Mechanical pencil. Is it as good as its counterpart? Let’s see.

photo-48

The body of the pencil is the same as the pen, starting with a sturdy stainless steel click button, and going to a black plastic clip “holder” for a stainless steel clip that does its job if one doesn’t get turned upside down and shaken. The barrel is also a nice, plain stainless steel with the pencil’s information printed on it. The grip section is plastic with a bit of “knurling” that provides some grip and is unintrusive. The real difference between the two bodies is that after the section the pencil has a black plastic taper with a metal pipe for the lead. Unscrewing this will reveal the lead and make it breakable but otherwise not change the operation.

photo-45

The push cap operates smoothly, and can be removed to reveal an eraser that does its job, though it has no replacements in the package. Removing the eraser reveals the lead feed, which thankfully does come with more than one lead in the standard version. The lead feeds well, and writes as smooth as one would expect a standard HB to. It is a bit hard, and brittle at times; unlike many pens there is no shock absorber, so keep the lead as short as possible. The pipe and the lack of a shock absorber do make this pencil much more like a drafting pencil than the standard mechanical pencils, and it would work in that scenario in a pinch (or perhaps a bit longer). And its rugged steel exterior make it great for taking anywhere. One would just have to worry about the pipe getting bent or tearing something.

photo-47

It’s a great pencil, really, and it lives up to the expectations of its ballpoint relative. It isn’t perfect, but it’s a tough little thing that gets the job done, and for an inexpensive price, considering the materials and drafting-friendly capability. If one can find refills, they will have a pencil they can take anywhere for a very long time, even if it’s not their main utensil.