Review – Zebra F-701 Ballpoint

For quite some time now, my go-to ballpoint pen has been the Zebra F-301. I carried one around with me every day and have one in each of my various bags. To me, they are a very good compromise between writing performance, durability, availability, and expense. But recently I managed to crack off the plastic grip in my daily carry pen (in quite the unremarkable way, I just fidgeted with it too much and was popping the threads) and even though it is a problem that I’m not likely to replicate in the future, it set me on a quest to find an all-metal replacement that won’t have a similar problem. I’ve been fairly happy with other Zebra products in the past (with the exception of their fountain pen) and I ended up finding the “upgraded” version of the pen I was currently using, the F-701. This all stainless-steel pen with a knurled grip is supposed to be durable, elegant, and precise. Does it live up to its own advertising?

The body of this pen looks simple even when compared to the already minimal F-301. A 3/8ths tubular body uses more than 4 of the pen’s overall 5 ¼ inches in length. The last inch or so from the tip is very finely knurled to form the grip section, after which is a stainless-steel cone with some cosmetic step-downs. This cone screws off, providing the only access to the refill or inside the pen at all, allowing you to see that the walls of the body are about 2mm thick. On the other side of the pen there is a highly polished clip in the bent-spring steel fashion with “ZEBRA” and “F-701” stamped into it that is joined to the top of the barrel with the only bit of exposed plastic on the pen. Above this is a clicker button, which is, in fact, a plastic plunger with a metal sheath. You can theoretically remove this sheath, but there is no reason to (it doesn’t give you access to anything) and it doesn’t look like it will come off under normal conditions.

The refill is exactly the same as the refill for the F-301, which means it is fantastically smooth for a ballpoint, with a black that’s dark enough and generally resistant to wear (I believe you could also swap in one of their gel refills if that’s more your thing). This smoothness is added to by the weight of the pen, which is almost twice that of the 301, and it really shrugs off the common complaint that ballpoints require too much pressure to write with comfortably. I can write in cursive with one of these pens as fast and as easily as I could with any of my fountain pens and I get the benefit (or detriment) of that thin, precise line.  The clip is almost identical to that of the 301, but it seems to be attached more securely and doesn’t have as much of a problem with bending away and losing its grip over time (but this is still an area that can be improved: I wouldn’t clip on anything thicker than a piece of fabric). The knurling on the grip is superb, completely removing any slipperiness while being fine enough to not dig into the skin to be noticeable. This, combined with the larger size, will probably be good news for anyone who has cramped up trying to hold onto the 301 series. And finally, the click mechanism is very smooth with a nice amount of back pressure. Despite claims that it is “silent” there is still a noticeable click, but it is much less satisfying. The overall mechanism feels much more structurally sound and is nicer but ever-so-slightly more difficult to push.

I would consider the 701 an upgrade in almost every way. It is heavier, thicker, and more expensive. But the all-metal body is (even more) rugged, and the feel of the writing experience from click to page is smooth and seamless. My complaints are limited to the clip still being a problem if bent out even just a little, and the habit the shiny metal body (especially the polished clip) has of collecting scratches (some people might also be displeased about the grip being not-grippy enough for them, or the body feeling cold/heavy because of its metal construction). For the price, I’d say this is the best you could do for a ballpoint, and I might even go so far as to put it up as one of the best ballpoints I’ve ever used.

Review – Parker Classic Pen and Pencil Set (GT)

Have your eyes ever glanced over something where you “knew” what it was but had to double take because something was just “wrong” about it? That’s what happened to me when I first came across the Parker Classic pens. I thought they were Jotters, Parker’s very popular, least expensive pen, but something was just… “off”. And indeed it was, after purchasing it and comparing it to my Jotter at home I discovered that it is a bit different (mainly in thickness), but does that improve anything?

My version (the GT, which I think stands for “gold trim”) is a super simple design. The barrel is a cylindrical piece of stainless steel that screws together in the center. The front third tapers down to a hole, through which the nib protrudes when activated (on the pencil there is a small lead pipe here, extending the length slightly). And the back section of the pen ever so slightly tapers down to the click mechanism. Both the top clicker and the arrow-shaped clip are done in a gold-colored, chrome-like finish, and “Parker – Made in U.S.A.” is very minimally engraved at the separation (on the back half).

The clip does a very good job, being more detailed but just as strong as the clip on the Jotter, and actually affixed to the metal and not on its own separate (if unremovable) band. The clicks on both the pen and pencil are quite satisfying, the pencil more so because it is slightly shorter (thus having less traveling distance) and more firm (it also has rings near the top to help distinguish between the two in the pocket). Because of its length, the pen one does seem a bit floaty. The pencil’s click button also pulls off to reveal a usable pink eraser (it’s nothing special), and when that is removed, the lead reservoir (for .5mm leads). The design of the pencil here means that the mechanism is fully attached to the front part of the pencil, and unscrewing the back does nothing to hinder the operation (other than making it less comfortable) or allow for any maintenance.

I haven’t mentioned the ink/lead yet because there isn’t really much to talk about. The black, fine cartridge (standard Parker type) and HB .5mm lead the two come with is exactly as you’d expect. Relatively smooth, almost dark, and mostly break-and-water-resistant. The main difference in handling comes from the size. They are a bit longer than the Jotter, at 5¼” (pen) and 5 3/8” (pencil) long, but it’s really the diameter that makes the difference, being 1/8” smaller at their widest of ¼”. This doesn’t make them much lighter, but it does make them nicer to use for someone like me who likes smaller barrels on their pens, or is trying to store things more efficiently.

It is an upgrade from the area of 3rd tier pens (like the Jotter, which is above semi-disposable pens, which are above fully disposable pens). It has more refined, nicer feeling, and is just as durable. But it isn’t too much of an upgrade unless you really like the slim dimensions (like me). The fact that it’s apparently been discontinued is a hint at whether or not people really thought it was worth upgrading, but I’m a fan, and at a decent price I think they are serious competition for the Jotter in the pencil case. I’m keeping mine around, and it’ll probably last me a lifetime.

Review – Pentel GraphGear 1000

My favorite mechanical pencil is the Pentel GraphGear 500, but its MSRP is a bit close to my usual ceiling budget for new pencils, so I was reluctant to pick up its “big brother” the GraphGear 1000, until I saw one for a good deal. There are a lot of upgrades and features the 1000 has that the 500 does not, but is it worth the extra price (it usually costs)?

If I was to give an example of an over-engineered pencil, the GraphGear 1000 would be that pencil. The body starts out pretty simple, with the back half being mainly cylindrical and having all the necessary information printed on it. The front half has the (grip) section that is very lightly knurled and has 24 embedded rubber ovals to increase comfort and grip. The “cone” in front of the section that steps and tapers down to the “lead pipe” screws off, allowing the section to be removed and reoriented. A small cutout at the end of the section (near the middle of the pencil) can then be oriented over a scale of hardnesses that are printed (stickered) around the inside barrel to show the correct hardness of the pencil (mine was preset at HB). Then the cone can be screwed back down to lock in the selection. (Otherwise the inner barrel is a smooth black plastic with a matte finish that isn’t really intended to be seen).

The lead pipe usually featured on “drafting” pencils is curiously absent when one first inspects the item. It can be found by pressing the clicking mechanism on the end, at which point it pops out and is locked in place via a locking mechanism on the clip. Further clicking of the mechanism will extend the lead (or, by holding it down, allow the lead to be retracted) and pushing the top of the spring-loaded clip will release the simple locking mechanism and cause the lead pipe to quickly hide away in the cone again. The clicking mechanism cap can be removed to reveal an eraser, which can be removed to reveal lead storage. Both are friction fit with nice tolerances. And the mechanism’s cap has the lead size (.5mm for mine) printed on the top for easy reading when in a pencil cup.

How well does all of this work? Very. Everything is solid, most of the important parts being made out of metal, giving it quite a heft when compared to the 500. The clicking and locking mechanisms are smooth, quick, solid, and satisfying to use. There is no play at all when using the pencil, and it tucks away perfectly (when the lead is retracted). The HB lead it comes with is standard. It’s bordering on the hard side of HB, but it’s still pretty smooth, and from using the same variety in other pencils for quite some time I can say it is reasonably break-resistant for the .5 size. The grip is surprisingly comfortable and the rubber ovals hardly noticeable (in fact they might not be necessary, or may even make it a bit more slippery than I would prefer). The clip does a very good job of clipping (mostly because of the cutout and spring present for the locking mechanism), and it slides off with very little damage from its well-polished edges (my model has a chromed-out clip for extra smoothness and flair I guess) and it being the locking mechanism means the lead pipe will retract as soon as it’s clipped on to something, preventing damage. The eraser is the same as the one on the 500, and it does a decent job getting rid of marks while being firm enough to not disappear completely.

With that multitude of features and solidness of performance is it worth the price? Assuredly. But do you really need all of those features? Probably not. This is a great pencil and I’m really glad I was able to get one (even more glad it was at what I consider to be a really good price) but it just won’t be replacing the 500 for me (at least at the moment: only time will tell). I’m not really sure what it is about it, since it’s got a nice weight, a satisfying feel, good writing capability, and it isn’t ugly (though my model {the PG1015} is a silver color with chrome clip and button and I wouldn’t call it the most handsome pencil in my collection) but it’s just not right for me. Still, it is an astounding pencil at a very good price and if the features I’ve talked about interest you, or you want to move up in the world of mechanical pencils either as a hobby or an artist I can heartily recommend this as an excellent next step.

Review – Parker Jotter Stainless Steel

There are many pen brands out there, specializing in various things. Most Americans who know more than nothing about pens would recognize the Parker brand as a longtime quality maker. One of the least expensive, most accessible, and longest running products they make is the Jotter ballpoint/gel/rollerball pen that utilizes Parker’s own refill type. I have here the “all stainless steel” version, how does it hold up?

photo-113

The pen itself is obviously all stainless steel. At the back is a very pleasantly tapered click button, followed immediately by the clip shaped as the famous Parker arrow. The pen from there slowly bulges and then tapers down to the end where it almost seamlessly meets with the pen’s point when it is not retracted, with only a slight seam 1/3 of the way down the pen where it is unscrewed to be refilled.

photo-112

Now I can’t speak to the Parker brand refill this pen came with as I don’t remember how it wrote and I currently have a Monteverde refill inside (that writes very well, as I said in my review). But I can talk about the feel and sturdiness, both of which are superb. The click mechanism is a bit different and it just feels not as advanced as some of the more modern pens, but it is very solid and satisfying. There’s nothing wrong with it, it just feels older (like using one of those drafting pencils that have been in production for 60 years). And the steel finish is very easy to grip, while beings stylish and well-wearing. Scratches and such barely show up, keeping the pen looking nice and professional for some time.

Overall it’s a great pen, and for the price (a little more expensive for the “all stainless” one) it is easily a great value as one pen could last a lifetime (though refills might not be cheap). It’s hardy, with a time tested, solid mechanism, and while it doesn’t look as nice or handle as well (or have as many expensive materials) as the more expensive ballpoints out there it still looks professional, fits in with both modern (stainless) and retro (colors) styling, and can take a rough and tumble life. It’s a tough little trooper.

Mildly Relevant Reviews – Zebra V-301 Fountain Pen (and Modifications)

The last few minutes of this review sum it up if you don’t want to see my process of attempting to make the pen work.