Review – Muji Portable Scissors (35mm)

Scissors are one of the most useful tools the average person can have at their disposal. And, until I began looking for a more “travel-safe” option, were the main reason I kept a Swiss-Army Knife in my pencil case. My quest for an option that was a full scissors without a knife attached eventually led me to Muji’s minimal, compact, spring-loaded design. But how well do they actually shape up?

When the cap is on, the entire device is a 4½ inch cylinder with a diameter of a little over a half inch and a thin wire clip attached on one side. The clear plastic cap is about 2½ inches in length. It snaps over a small ridge in the handle, and has an inner cylinder to keep the point of the scissors roughly on track. When it is removed, the scissor springs open using a wire spring mechanism and the white handle portion splits into two (with roughly 1/3 and 2/3 of the volume in either handle). There is virtually no written information on the entire device, save for a warning in Japanese (which I can’t read, but it has a caution triangle).

Despite only having to do two things, the functionality of this little guy is slightly underwhelming. The clip is far too tight to be useful in most situations, though it doesn’t have any sharp edges that might cause catching or tearing. And the default sharpness of the blades is basically tolerable. They cut paper, tape, and blister plastic just fine (so more than 90% of situations are covered), but they struggle with cloth or more cellophane type plastics.

These little guys are probably the best set of folding travel scissors I’ve found that haven’t been attached to a multi-tool. They’re relatively compact, substantial feeling, and efficient, despite being unergonmical and lacking significant cutting power. Sometimes the spring is a bit overzealous, but it’s a convenient feature since there are no finger-holes and I like having a body that doesn’t feel like it’s going to shatter every time pressure is applied to it. If I could, I’d still probably want my old Victorinox (multi-tool) scissors back in my bag, but as a portable, checkpoint-friendly option, these guys get the job done fairly inexpensively and without having to fold out stupid finger-holes.

Review – Swingline Tot (Mini) Stapler

I’ve been using an old Swingline CUB stapler at my desk for years now. The combination of small size and standard staples makes it perfect for me, a person who doesn’t have to staple often. I also have the super small Tot-50 stapler in my pencil case, and while the size is good it does use a different type of staple to most other staplers. But now Swingline has a middle ground even between those two with the Tot, a stapler that is just about as small as you can get while still using regular sized staples. But how useful could that be?

The Tot is about 2½” in total length, 1¾” tall, and 1¼” wide. These measurements are a bit larger than they could have been due to the rounding of the stapler body; there are no sharp edges on it. At the back there is a curved piece of metal sticking out to serve as a staple remover. It works fairly well, though unlike the standard “jaw” type it does have the tendency to fling used staples across the room. On the top and bottom of the main body there are relatively comfortable divots in which to place your fingers when stapling. And the entire thing is a sort of teardrop shape, narrow in the back and widening near the front before suddenly dropping off.

Underneath is a small rubber “plate” (for lack of a better word) covering with a handy mark representing staples stamped into it (in the previously mentioned divot), though if I didn’t know they were supposed to be staples I wouldn’t have figured it out. Peeling this back from the nice little nail nick (it’s held in place with tabs in slots) reveals a small storage compartment with enough space for a regular block of standard sized staples, and enough space for (someone with smaller) fingers to get in and grab it. Below these staples is the general information about the product, save for the brand name which is proudly displayed on top. This rubber piece is fully removable, though it is a bit finicky to get it past the staple remover on the back both when getting it on and off. I can also say, from a spill on my desk, that the rubber seals well enough to be water resistant (but I wouldn’t count on it).

As with most Swingline products stapling is as easy as can be. There’s a surprisingly good amount of leverage in this design and it connects pages cleanly and neatly together. Its use of regular sized staples and a mouth about as wide as your standard desk stapler means that it will basically perform the same function, with its only limiting factor being capacity (and durability since it is made of mostly plastic and most staplers are metal). My only general complaint is the top; it’s quite easy to open and hinges back far enough to make loading a breeze, but the tab that holds it in place when it’s supposed to be locked down is very weak and I’ve found it to pop open with slight provocation, or even without provocation at times. And that’s slightly worrying: I don’t want staples everywhere. But the spring holding it down is fairly strong, and if kept on the desk or in a case this shouldn’t be a problem.

So, if you’re not one that staples often, have limited desk space, or want to carry a stapler with you but not special staples (but maybe with a bag or case) this little guy will work great. It’s small, easy to use, and gets the job done. It isn’t as durable as the larger versions (or its metal predecessor the Tot-50), but with care it will work for a long time (but maybe not as long as my CUB) and for how inexpensive they can be I’d say they’re definitely worth it (and they come with a box of staples, which is cool).

Review – Helix Architects Triangular Scale

Rulers. Well, we all need them at some point. Whether you need to draw a straight line or know the distance between two points, they come in real handy. But sometime the information you need is just not on your ordinary ruler. So you get an architect’s triangular scale. But which one? Let’s look at one of the cheapest: the Helix Architects Triangular Scale.

20130521-102106.jpg

First off, the plastic this thing is made out of is very brittle and sharp. Little burrs and notches line the sides. There are no rounded corners, and you can easily stab yourself on the triangle points. However, there seems to be no fear of shattering or snapping in the piece, it is quite sturdy.

The information is printed in a nice, readable black over the very-slightly off-white plastic. From what I can tell (truth be told I’m not entirely sure about what all the sides are for) they are accurate. I have compared them with several other units I have. The ink used is resilient, but also raised and will rub off with prolonged use as will most rulers and the like.

20130521-102112.jpg

Overall, for it being fairly cheap, it is a nice piece. It does its job well and will probably serve for several years before needing replacement with proper care, though there are many more comfortable or longer lasting alternatives out there.

Review – X-ACTO 3-hole binder Punch

Sometimes you need to do stuff with your art that isn’t art stuff. Sometimes you need to file it away, or keep it safe in a cover, or organize it in a binder. If you’re looking to do the last one, then you might need the X-ACTO 3-hole binder punch.

20130521-101541.jpg

This semi-sturdy piece of transparent plastic is designed to fit in a binder and easily punch holes through a few sheets of paper. I stress a few because on the box it says the limit is three. And yes, even three sheets is very stressful to this thing, and after that it just starts tearing the paper.

I said it was plastic earlier, but the punching apparatus is actually a nice metal piece on a hinge. It is easily as sturdy as any other hole punch I’ve used. The hinge, though, is so close to the paper that it is what you have to use to get a nice clean straight punch line and because it is a hinge this is very difficult.

Off to the bottom there is a guide that you can place your paper on and it works well. There is also a flimsy piece of loose-fitting plastic that I assume is supposed to act as a guide so the paper stays down, though it will hardly do this job well and seems as if it will snap at any moment. It also jiggles unnecessarily. On the front is a 10-inch ruler, which would be nicer if it was ruled correctly, as it is, it is about a quarter of an inch short.

20130521-102051.jpg

And finally on the back are a pair of fold-out binder loops that will allow you to stick this thing in any 3-hole binder you desire, though they will make a horrible grating sound and the plastic they’re screwed into looks like it can break in a hurry. They will never break off the binder rings on their own though.

Really this is just a cheap hole punch. The actual punch is quite nice, but its housing is lacking. If you only need to punch a few sheets every once in a while this is alright. Any more hole punching and this thing will be useless. It will certainly break within a year or two but it is quite cheap. So if that is what you want or need from your hole punch, go right ahead, otherwise try something further up the ladder.

Review – Westcott rulers

Well, when one is drawing, or drafting especially, it is useful, if not necessary, to have a ruler. And one might think that all rulers are the same. But they’re not. Some rulers have uneven edges, or mis-marked inches.

20130408-004500.jpg

A cheap ruler might cost half a dollar, and a good one might cost a full dollar. It’s not much difference and definitely worth it. The Westcott rulers that I have here are very functional, durable, and standard. Then have straight edges and correctly marked inches. One is clear acrylic and the other is steel. I use the steel for inking and the clear for sketching. I would recommend two rulers for that reason. And these are flexible, and the markings are wear-resistant. My only real complaint would be that the acrylic ruler scratches a bit too easily.

This sounds much more like a recommendation than a review, and it is, sort of. It’s a no-brainer to get a ruler. Getting a good one is not much more expensive than a cheap one, and these work great, they’re some of the best I’ve used.