Review – Crayola Triangular Crayons

Are regular crayons too small for your hands or prone to rolling off your table and getting all over the floor? Don’t worry, Crayola has your back with triangular crayons that “promote proper writing grip” and are “anti-roll®” (that registered sign isn’t a joke by me, it’s actually on the box). They are available in your standard pack of 8, or, as in my case, 16 (and maybe larger packs, but I can’t find any), and I’ve been seeing them pop up in stores recently*. But are they the right fit for you?

From what I can tell, the colors here are exactly the same as in all other Crayola crayons so I won’t be going over them here (ColorsReview). The pack comes in a standard cardboard box (a little rough around the edges) with a cardboard tray inside and two plastic dividers to hold the crayons in place. It’s a pretty sturdy system and none of my crayons were broken or significantly worn.

The bodies of the crayons themselves are quite a bit larger than your average crayon, being triangular in shape (with rounded corners) with each face being just shy of a half an inch wide. They’re wrapped with a craft-paper-esque standard Crayola wrapper and have a step down about a half-inch from the front followed by a triangular point. From the box they are super comfortable, resting nicely in the hand with the paper being both warm-feeling and giving enough friction to prevent the hands from slipping. They work well both for children without fine motor skills and adults with larger hands (though the grip is actually surprisingly small). And they perform just as well as any other Crayola crayons (that is to say, very consistently and pretty good for a wax crayon, but not much use for blending or layering).

I’d say the gimmick works, if you (or whoever you’re buying them for) were having problems with regular crayons being uncomfortable, held wrong, or in a constant state of rolling off the table. They are a fairly inexpensive solution, though that shows: imperfections in the wax mixture and paper application are readily apparent (with several noticeable chunks of crayon missing in some places). Maybe that’s just my pack, maybe Crayola’s manufacturing standards are going down, or maybe they were always like that and I didn’t notice. In any case, they are effective in design for both children and adults, and probably worth the little extra cost in crayon mass alone.

 

*Despite the fact that I peruse office/art supply aisle frequently I miss things just as frequently, so they might have been there before.

Review – Faber-Castell Grip 2020 Ballpoint

Sometimes the basic problems of a cheap ballpoint pen can just get to you. Many ballpoints have a round or hexagonal design that can lead to hand cramping or slipping while trying to write with thick, uncooperative ink. You see additions like silicone rubber grips occasionally as a remedy in the US, but apparently in places like Peru they have attempted to remedy these problems directly in the design of the pen. The Faber-Castell Grip 2020 boasts an ergonomic triangular design, with as studded grip and “smooth writing” ink. But how well does that improve performance?

The body is a simple, translucent, subtly triangular-ized cylinder with 150 small rounded “studs” for grip evenly positioned on the faces. The cap is round, with an integrated clip, and it has the relatively unique feature of sliding “under” the barrel rather than over it with the required step down being about the last quarter of the cap. Underneath the lip holding the cap in place there is a slightly tapered cone, friction fit over the ink tube; this cone can be removed, allowing the ink tube to be replaced. At the back there’s a stopper that steps down near the end, forming a space between it and the body where the cap can be posted. Over this stopper, on two sides of the triangle, there is written material: stamped in silver lettering is “Faber-Castell” and printed on a label is the barcode, model number, ink (and pen) color, and “Made in Peru”. I’m a bit disappointed by that, since, even though it’s on the back, labels on writing instruments have a tendency to get damaged and if that happened you wouldn’t know the model to get a replacement.

Functionality is quite good. The cap both caps and posts securely while maintaining the “lines” of the pen (the pen flares out ever so slightly in the back so it doesn’t match up as well there, leaving a step down instead of a {relatively} smooth transition). The clip is fine but isn’t very tight and it slips on thin material (its attachment point and the plastic it’s made of are surprisingly rock-solid, though). The ink is smooth as promised, coming out of a very medium tip (broader than I like, to be honest). For all intents and purposes it is the same as the other Faber-Castell made-in-Peru pens, maybe a little bit darker, and with blobbing being present, but not nearly as frequent as the other models I’ve looked at (counter-intuitively {usually wider tips on ballpoints leads to more blobbing}).

It’s a very nice little pen. For my personal daily use I prefer something shorter and with a finer tip, but this pen is comfortable, easy to hold, smooth writing, and doesn’t slip. I also really like the cap and how it doesn’t expand the circumference of the pen (save for the clip) and is probably less prone to crushing or cracking. If they managed to make the clip a little better, and offered the top in a fine I would seriously be looking to import some to use all the time. So if you’re looking for a simple, relatively inexpensive, comfortable, and durable (the plastic is very solid feeling) pen, and don’t mind importing, I’d certainly give this one a try.

Review – Paper:Mate Mongol Tri Pencil

In the US most of the wood pencils you’ll find are either round or hexagonal (at least in places I’ve seen) with emphasis on the hexagons. I personally prefer round for comfort, but they tend to roll off of any but the flattest of surfaces. Apparently people in other places have found this an issue as well, and attempted to rectify it, because I recently received a set of writing utensils from Peru, in which were 4 triangular writing instruments, among them the Paper:Mate Mongol Tri. Is it an upgrade?

At first glance there’s nothing interesting about their design. They’re regular pencil length: ≈ 8”, with a crimped ferrule holding a pink eraser, and yellow paint with black (stamped) lettering. The printed information is all you need to know and a barcode, there is even a stamped but not colored “woodclinched” which I’m sure means something. It’s an overall similar diameter to standard pencils here in the US, but maybe a millimeter or so thicker. That extra thickness is to accommodate the rounded triangular shape (it’s probably the same volume of wood overall) that doesn’t roll off the desk (for the most part; you might have a very steep desk) and fits quite comfortably into the hand when using a standard 3-finger pencil grip. My fingers are much closer together when using this rather than a hexagonal design, but there isn’t much of the hand cramping you get when using smaller diameter writing instruments, and the paint provides enough friction to hold onto.

Performance is nothing special and what you’d expect from a #2 Paper:Mate. The lead hardness is middle of the road, more on the softer side of HB, but that really just contributes to it losing its point quickly and not much in how it looks on paper. The eraser is fine, with nothing special about it. Like most integrated wood pencil erasers, it isn’t really enough for the life of the pencil, but it won’t be vanishing on you. In the package they come with a point that was pretty dull when I got it (but it did fly and go through the US Post Office first) and was obviously made with a chisel sharpener (three pretty flat cuts, one on each side) but it does work just fine with a standard rotating sharpener, even if it’s a bit strange to hold.

If you really don’t like the feel of your average round-ish pencil, this (or similar) might be worth seeking out. I certainly don’t mind using it, and can see how it would be more comfortable under certain circumstances. But it is a fairly standard test/school/general-use pencil, with nothing special about how it writes. I‘ll definitely be keeping one around, and I hope to see products like this in the US in the future, but I’m pretty comfortable with round writing implements and don’t see the need to swap.

Review – Swingline Tot (Mini) Stapler

I’ve been using an old Swingline CUB stapler at my desk for years now. The combination of small size and standard staples makes it perfect for me, a person who doesn’t have to staple often. I also have the super small Tot-50 stapler in my pencil case, and while the size is good it does use a different type of staple to most other staplers. But now Swingline has a middle ground even between those two with the Tot, a stapler that is just about as small as you can get while still using regular sized staples. But how useful could that be?

The Tot is about 2½” in total length, 1¾” tall, and 1¼” wide. These measurements are a bit larger than they could have been due to the rounding of the stapler body; there are no sharp edges on it. At the back there is a curved piece of metal sticking out to serve as a staple remover. It works fairly well, though unlike the standard “jaw” type it does have the tendency to fling used staples across the room. On the top and bottom of the main body there are relatively comfortable divots in which to place your fingers when stapling. And the entire thing is a sort of teardrop shape, narrow in the back and widening near the front before suddenly dropping off.

Underneath is a small rubber “plate” (for lack of a better word) covering with a handy mark representing staples stamped into it (in the previously mentioned divot), though if I didn’t know they were supposed to be staples I wouldn’t have figured it out. Peeling this back from the nice little nail nick (it’s held in place with tabs in slots) reveals a small storage compartment with enough space for a regular block of standard sized staples, and enough space for (someone with smaller) fingers to get in and grab it. Below these staples is the general information about the product, save for the brand name which is proudly displayed on top. This rubber piece is fully removable, though it is a bit finicky to get it past the staple remover on the back both when getting it on and off. I can also say, from a spill on my desk, that the rubber seals well enough to be water resistant (but I wouldn’t count on it).

As with most Swingline products stapling is as easy as can be. There’s a surprisingly good amount of leverage in this design and it connects pages cleanly and neatly together. Its use of regular sized staples and a mouth about as wide as your standard desk stapler means that it will basically perform the same function, with its only limiting factor being capacity (and durability since it is made of mostly plastic and most staplers are metal). My only general complaint is the top; it’s quite easy to open and hinges back far enough to make loading a breeze, but the tab that holds it in place when it’s supposed to be locked down is very weak and I’ve found it to pop open with slight provocation, or even without provocation at times. And that’s slightly worrying: I don’t want staples everywhere. But the spring holding it down is fairly strong, and if kept on the desk or in a case this shouldn’t be a problem.

So, if you’re not one that staples often, have limited desk space, or want to carry a stapler with you but not special staples (but maybe with a bag or case) this little guy will work great. It’s small, easy to use, and gets the job done. It isn’t as durable as the larger versions (or its metal predecessor the Tot-50), but with care it will work for a long time (but maybe not as long as my CUB) and for how inexpensive they can be I’d say they’re definitely worth it (and they come with a box of staples, which is cool).