Review – Zebra DelGuard (0.5)

At first glance, the Zebra DelGuard looks like the popular Uni Kuru Toga and offers a similar lead-break-reducing feature (though without the point protection). The clear plastic section is molded with a similar grip and the body is black-ish and slightly thicker than the average mechanical pencil. Inside, though, is what appears to be a much simpler spring-mechanism that promises to keep your lead from snapping. Does it really do enough?

The body is a simple, matte-black tube with a small logo just before the center-band. On the back is an attached clip with some printed information, and a chrome click-button cover that easily slips off to reveal a thin, white eraser that easily pulls out to reveal the lead tube. The (grip) section is a black, translucent, and slightly slippery-feeling plastic with some ridges for grip and a slight slope down to a small metal lead pipe.

Performance of the main features of (mechanical) pencils is good but not outstanding. The clip holds well and doesn’t rip fabric; the eraser removes marks handily with minimal shavings (and a little bit of smear); and the lead is average verging on soft (it is fairly smooth and I like the .5 size). The actual DelGuard system is a bit more dubious to me, though. It’s basically a few springs that allow for a huge range of vertical motion for both the lead and the lead pipe. This means that if the user bears down vertically on up to a few clicks-worth of lead it will simply retreat into the pencil and not break, even with a considerable amount of force. Unfortunately, I write/draw at an angle, and that is apparently extreme enough to mean the lead will snap with an amount of pressure I usually associate with a lead snapping, since the system only relieves pressure vertically. This isn’t really an issue for me; I write/draw softly enough that lead breaking isn’t something I worry about. But it has the same problem for me that the Kuru Toga has; that is, with my writing style, the system doesn’t work, making it completely pointless. This pencil could not have its cushioning springs and be exactly the same experience for me.

So, as a pencil, it’s a good writer that might be moderately overpriced (it’s more expensive than the Kuru Toga). I’ve gotten other pencils with a similar writing experience for a similar price, but this is nothing special and I personally wouldn’t get it over less-expensive Zebra models, especially since the grip doesn’t feel too good in my hands; I haven’t had it actually slip, but it just feels slippery. If you really have a serious problem with your leads breaking, this might be worth looking into, otherwise it’s just a tossup with similar models.

Review – PaperMate “Write Bros” Mechanical Pencils (48 pack)

PaperMate isn’t exactly known for making the most high quality products in the world. But for the most part they do make products that get the job done in an inexpensive and readily available way. And that philosophy is very apparent in the 48 pack of “Write Bros” mechanical pencils, which generally sells for as little as a 2 pack of more well-regarded pencils. Are these the perfect solution for someone looking to supply a group on the cheap/keep losing their own, or are they too fragile to be worth it?

The bodies are similar in size to a normal wooden pencil, but a bit shorter at just over 6”. Molded in a slightly pearlescent plastic and one of 5 average colors, they have a ribbed grip section for the last inch and a half of the barrel, followed by a cheap-looking frosted plastic cone that is screwed onto the end and from which protrudes a small plastic “lead-pipe” and lead from inside that. Near the back of the pencil, there is an exposed click-advance mechanism with an integrated pocket clip that moves with activation. On top of that is a small white eraser, which can be removed to expose the lead chamber and allow refilling. Oddly enough at this price point, the item can be further disassembled by unscrewing the frosted cone on the front, at which point the entire advance mechanism will essentially fall out of the back of the barrel. There is nothing useful that can be done from this point, but it is interesting to look at.

Performance is so-so to average. The 7mm HB lead is what you would expect at the price, a bit scratchy and softer than advertised (prone to breaking). The clip technically does its job but I wouldn’t count on it, and the plastic is brittle enough that it would easily snap. As far as erasing goes, the eraser is superb, but it is a small size and virtually vanishes when put to its task. The feeling of the click mechanism is unsatisfying but inoffensive in any way other than it feels like it will quickly break.

Basically you get what you pay for, which in this case is not much. Even PaperMate didn’t bother putting a name on these pencils (I call them “Write Bros” because that’s what’s on the box and online, but the items themselves only say “Paper:Mate”, and “0.7mm”). But there isn’t much terribly wrong with them. If they are intended to be essentially “disposable” mechanical pencils, they succeed. Each has two leads (though many of mine were broken and thus less useable) and an eraser, enough to be useful, but little enough that the poor and brittle construction will be able to survive that use. They don’t seem to be meant to be refilled, as they aren’t worth the trouble, and being used much more would likely result in broken clips and eventually mechanisms (but it is a possibility for a little bit). And putting aside environmental or frugality concerns they are an inexpensive and relatively comfortable way to provide functional pencils to a lot of people, or many pencils to one particularly careless person.

Review – Kokuyo PS-FP102 Mechanical Pencil (.7mm) (DM)

In a time where a lot of companies are trying to re-invent the wheel with their pencils, Kokuyo from Japan has made a relatively inexpensive, minimalistic, and comfortable mechanical pencil. The PS-FP102 (Pencil Sharp {my guess from the website}) omits several things that could be thought of as standard, and uses that effort on a sturdy and comfortable design (that is, from what I understand, ostensibly for children in school). Is the trade-off worth it?

The body is one of the simplest to be found on a mechanical pencil, being mainly a vaguely triangular-ized (at least the “frosted” versions are triangular) cylinder with a rubbery coating for the 4 ½” body. Sticking out a quarter of an inch on the back is the click-advance button, and five eighths on the front is a plastic cone, from which a smaller metal “lead-pipe” can emerge bringing the total length of the cone to three quarter inches. Printed (maybe stamped or adhered) on one of the facets is all of the information about the pencil (which seems like it will rub off in the future but has withstood use so far).

The body can be unscrewed at the cone, revealing that the rubberized triangular barrel is just a sheath, and the cone mechanism can be pulled from the front. As far as I can tell no further takedown can be done and neither of these operation provide any real benefit that I can see beyond checking how much lead is in the pencil (through a convenient window {the view on my frosted black version from the outside is blocked}) and perhaps clearing out the front mechanism.

Writing performance is good; the lead is a .7mm and presumably HB (there are also .9 and 1.2mm versions). It’s a bit too thick for what I usually like to write with (.5mm) but it is fairly break-resistant and smooth, which would be good qualities for a school pencil, and from what I understand that is what it was originally designed for. There is no eraser or clip (though there is a version of the pencil that comes with a stand-alone eraser and friction-fit clip) and instead of having to remove a back piece to insert lead there is simply a hole just big enough to fit the lead through that lead can be fed into. Once it has been pushed all the way in, it enters into a larger reservoir and will not likely find the correct angle with sufficient force to come back out of the hole. It’s honestly a pretty elegant lead-feeding system if one doesn’t care about having an eraser.

The click-advance mechanism is very smooth and workable, but unsatisfying. The metal “nib”/lead-pipe at the front does retract and advance with the lead, neatly preventing any damage that it would cause but being a bit fiddly (it’s easily possible to retract the lead and not the metal piece, which is a bit of a strange situation). And the rubberized, triangularized grip is very easy to hold, not slippery at all, and quite comfortable (though not my preference), especially for hands just learning to write (it keeps fingers in the proper orientation). I must say, though, that it only barely resists rolling off the table more than its round counterparts.

So instead of an eraser or clip, this pencil provides an elegant lead-feeding system, comfortable and chucky triangular grip, and a stow-away point. All of which make it a good fiddly-bit-free pencil for students, and with a slide-over clip and external eraser (the integrated ones are never enough) it might also be a preferable one for artists or in the office. For the mostly reasonable price of ¥180 (≈$1.55) it’s a solidly designed, well built little pencil that seems like it would last under a bit of stress and is certainly worth checking out if you want a triangular grip or to forgo the standard integrated eraser for greater lead convenience.

Review – QuanTum Computer Pencils

Recently, I’ve gotten my hands on a few inexpensive pencils from Thailand. And at 12 Bhat (34 cents) for 2 pencils and an eraser, the QuanTum Computer Pencils are fairly cheap and meant mainly for school work. But would they hold up?

Most of the information printed on the package is in Thai, so the most I can get out of it is that it’s a pencil, but the information printed on the body itself is in English, which is nice for people like me. The bodies are a simple, wooden hexagonal design with one rounded end. The two in my package have silver and gold painted bodies up until the last ½”, where there is a slim band of white paint followed by black for the end. Printed (notably not stamped) on of the facets is enough of the pencil’s information to get you by.

Out of the package, the tips of these pencils were poorly enough cut that I needed to sharpen them before being able to use them (the lead is centered, just poorly cut). The graphite itself is softer than “standard”, being a 2B, but it’s on the harder side of 2B. The very (tip) point wears off quickly but it takes some time to wear it down after that. Writing or drawing is fairly smooth and getting dark patches for test answers would be/is easy (I don’t have a scantron laying around to try it on, but it gets pretty dark). There is also a black “perfect for 2B” eraser included in a tiny card sleeve. This eraser is surprisingly good, especially with this pencil; it gets rid of almost any trace of writing besides the indent in the paper, and does so quite quickly. It is one of those that seems to evaporate when you use it, though, and there are quite a few “shavings” to sweep away (also the package says “dust free”, and I have no idea what that means).

I’d call these certainly adequate for what they are trying to be: school test or general use pencils. They function perfectly well but have a few quality mishaps, and I personally am more of an HB to F kinda person for my art/writing. If you run across them they’ll likely get the job done, but there’s no real need to go out of your way (like to Thailand) to find them.

Review – INC Soft Scripts Mechanical Pencils

Pencils for the office, school, or just someone who loses their pencils a lot can get pricey, fortunately there are a lot of inexpensive options out there. But are they even worth it to try? Sure, there are a lot of inexpensive pencils, but if they don’t “pencil” there is no reason to even consider them. INC Soft Scripts are one such pencil on the less expensive side of the aisle. How well do they work?

photo-252

The design here is pretty stereotypical, with the barrel being a thin, featureless tube of black plastic that tapers at one end to a plastic lead pipe. Near this end is a rubber grip in one of a few (5 in my case) colors that is narrower in the middle and has ridges toward the end, both ostensibly to help with grip, and they succeed in being barely noticeable. On the back end is a colored plastic push-advance mechanism (that matches the grip) with integrated pocket clip and eraser holder. This bit can be removed to expose the lead-holding tube that contains 2 extra leads (for a total of 3 per pencil). The clip is nothing spectacular, with most of the necessary information on it, and fairly brittle. But I feel the entire end piece would fling off before it broke.

photo-253

Performance is what one would expect. The HB lead is middle-of-the-road, leaning toward soft, but there’s nothing particularly off about it. I personally don’t use a .7mm size but it is a fairly standard size and makes breaking less of a problem. The eraser is one of the little white ones that will get the erasing done pretty well, but will seem to disappear almost immediately. The clip is serviceable but I wouldn’t recommend using it. And, finally, the mechanism is quite solid and workable; pushing lead out and holding it in place when commanded to do so.

photo-254

They’re easily usable, but far from spectacular, pencils, with their main benefits being the rubber grip (if you happen to like those) and the fact that they are the ones at the store (if indeed they are the ones at the store). There’s nothing really there to recommend them on, but no reason to tell you to stay away, either. They will perform fine for office, school, car, or other tasks where pencils should be inexpensive because of the frequency with which they are broken or lost. In comparison to others at a similar, price it would really come down to personal preference.