Review – Tach-It Metal Tap Knife (Carton Cutter)

Depending on the size or type of art (or craft) works one is doing, carton or box cutters may or many not be on one’s radar or considered a useful tool. But even if one isn’t using them for opening supplies or actually during the art-making process, it still isn’t a bad idea to have one around since they’re cheap and easy to use. The dozen-for-five-dollars that these are priced at might be a bit larger set than most people would need, but it’s still inexpensive enough that it wouldn’t be hard to pick up.

photo-124

Tap knives are one of the simplest types of box cutter. On this model, the outside sleeve is a single aluminum piece that has been bent around on itself. Inside is another piece of aluminum that has been folded with a cutout at one end and a flare at the other. A standard single-edge razor blade fits in the cutout end (and can be replace by sliding the insert out of the housing) while the flare prevents the knife from protruding too far forward.

photo-125

Use is simple. Tapping the back of the knife against a hard surface will extend the blade until it is stopped by the protrusion on the back. And when the cutting is done, the front of the knife can be tapped on a hard surface to retract the blade. Very little of the blade is exposed making it fairly safe to cut with, and it’s held in securely enough that I wouldn’t worry too much about accidental deployment of the blade. How well it cuts and how long it lasts depends on the razor blade used. And the ones that come in the package are not the greatest. The points are especially brittle, and while they can keep an edge for a decent amount of time, they will crack and split with too much stress.

As far as a cheap, effective, and simple box cutter goes, they work well enough. The fit and finish leave something to be desired: the edges are rough, the tolerances vary quite a bit, and no surface is smoothed and finished, but they are so inexpensive they are practically disposable. They cut, they’re reasonably safe, and they could last quite a long time since there’s not much too them. One could get better quality, but I’m not convinced you’d really need to.

Review – Dollar General Utility Knife Blades

Utility knives are an almost ubiquitous tool. They are inexpensive and easy to use cutting tools that are good on the job, at home, and for crafting and artistic tasks. And for most people they are used for jobs that scissors just can’t do. Even people who carry pocket knives can use a cardboard cutter now and then. But there’s a reason the blades come in 100 packs at 10¢-30¢ apiece. This set from Dollar General is about 20¢ apiece. How do they work?

20150524-234739

To start, the packaging says they fit most utility knives, which I’ll believe. Their shape is similar to most other blades I’ve seen, and they fit my knife just fine. They lock into place with about as much precision as one would expect, which is to say not much. There’s play in the blade when installed, but it’s workable. They come sharp enough to cut paper, and strong enough to cut household plastics, which are both really things that are a bit out of the general use of the blade. They don’t dull immediately, either. That being said they don’t last for very long and the blade itself can be dinged rather easily. They are also pretty fragile. When I was testing one on plastic the very tip of the blade broke almost immediately. They’ll last about a hard day (or 2-3 give or take) cutting cardboard, longer in the house, shorter if you’re cutting more or heavier things (like they won’t last literally all day just cutting), and for as cheap as they are I wouldn’t expect much more. And if cutting cardboard cleanly isn’t a necessity they can last longer. Finally, they are smothered in grease in the package to prevent rusting, and while I haven’t left mine out I have no doubt that they would rust really fast.

20150524-234744

So are they great? No. But no utility knife blades are great.  They do about as well as expected, and are at least safe for their main function of cutting cardboard, rubber and the like. If you need the blades right now, or don’t need to buy many blades, these will work, but larger packs or ones with slightly higher quality would be recommended.