Tag Archives: grippy

Review – Zebra F-701 Ballpoint

Posted on by
Reply

For quite some time now, my go-to ballpoint pen has been the Zebra F-301. I carried one around with me every day and have one in each of my various bags. To me, they are a very good compromise between writing performance, durability, availability, and expense. But recently I managed to crack off the plastic grip in my daily carry pen (in quite the unremarkable way, I just fidgeted with it too much and was popping the threads) and even though it is a problem that I’m not likely to replicate in the future, it set me on a quest to find an all-metal replacement that won’t have a similar problem. I’ve been fairly happy with other Zebra products in the past (with the exception of their fountain pen) and I ended up finding the “upgraded” version of the pen I was currently using, the F-701. This all stainless-steel pen with a knurled grip is supposed to be durable, elegant, and precise. Does it live up to its own advertising?

The body of this pen looks simple even when compared to the already minimal F-301. A 3/8ths tubular body uses more than 4 of the pen’s overall 5 ¼ inches in length. The last inch or so from the tip is very finely knurled to form the grip section, after which is a stainless-steel cone with some cosmetic step-downs. This cone screws off, providing the only access to the refill or inside the pen at all, allowing you to see that the walls of the body are about 2mm thick. On the other side of the pen there is a highly polished clip in the bent-spring steel fashion with “ZEBRA” and “F-701” stamped into it that is joined to the top of the barrel with the only bit of exposed plastic on the pen. Above this is a clicker button, which is, in fact, a plastic plunger with a metal sheath. You can theoretically remove this sheath, but there is no reason to (it doesn’t give you access to anything) and it doesn’t look like it will come off under normal conditions.

The refill is exactly the same as the refill for the F-301, which means it is fantastically smooth for a ballpoint, with a black that’s dark enough and generally resistant to wear (I believe you could also swap in one of their gel refills if that’s more your thing). This smoothness is added to by the weight of the pen, which is almost twice that of the 301, and it really shrugs off the common complaint that ballpoints require too much pressure to write with comfortably. I can write in cursive with one of these pens as fast and as easily as I could with any of my fountain pens and I get the benefit (or detriment) of that thin, precise line.  The clip is almost identical to that of the 301, but it seems to be attached more securely and doesn’t have as much of a problem with bending away and losing its grip over time (but this is still an area that can be improved: I wouldn’t clip on anything thicker than a piece of fabric). The knurling on the grip is superb, completely removing any slipperiness while being fine enough to not dig into the skin to be noticeable. This, combined with the larger size, will probably be good news for anyone who has cramped up trying to hold onto the 301 series. And finally, the click mechanism is very smooth with a nice amount of back pressure. Despite claims that it is “silent” there is still a noticeable click, but it is much less satisfying. The overall mechanism feels much more structurally sound and is nicer but ever-so-slightly more difficult to push.

I would consider the 701 an upgrade in almost every way. It is heavier, thicker, and more expensive. But the all-metal body is (even more) rugged, and the feel of the writing experience from click to page is smooth and seamless. My complaints are limited to the clip still being a problem if bent out even just a little, and the habit the shiny metal body (especially the polished clip) has of collecting scratches (some people might also be displeased about the grip being not-grippy enough for them, or the body feeling cold/heavy because of its metal construction). For the price, I’d say this is the best you could do for a ballpoint, and I might even go so far as to put it up as one of the best ballpoints I’ve ever used.

Review – Tombow Airpress

Posted on by
Reply

My Tombow Airpress was presented to me in Japanese packaging, and, as such, I had no idea what it was supposed to do. Upon careful inspection of the pictograms, I came to a conclusion that was reasonably close to the correct answer of: it is a pressurized ink pen (so it can write upside down or underwater and such {think: space pen}), but it only gets pressurized when you depress the click mechanism. If or why this would be an advantage over regular pressurized systems I do not know, but the pen does come with a set of other features to make it more usable in the rugged outdoors and whatnot, so maybe you’ll get a greater value out of it. I’m probably not the target market here (my pens lead a very relaxed life), but let’s take a look anyway.

The body of the Airpress is cigar-shaped, with a rubber coating, and quite short at less than 5”. An eye-shaped indent in the middle of the pen and six plastic flutes on the section expose the inner mechanism so that you can see a little bit of what’s going on inside. At the front, there’s a removable cone (which is where the pen gets refilled) that tapers down to where the ballpoint gets exposed. Up near the back is a plastic area, attached to which is a weird-looking wire clip (with a plastic end for extra grip), and protruding from it is the click-button. Sitting opposite the clip is a clear-plastic lanyard hole. The identifying markings are hard to find, with “Airpress” being molded into the rubber and “Tombow” “Japan” very minute in the plastic around the mechanism. Still, there is enough there for refills or replacement if you need it.

The tip is a little finer than the average medium ballpoint and writes smoothly enough, though I do find it has a problem with blobbing or bits of dried ink on the end like many of the pressurized ink cartridges. It is indeed capable of writing upside down (or without gravity) and underwater (which also proves that the ink is waterfast) with no noticeable effects on performance. The body is rugged and tough (though I don’t put my pens through terribly destructive situations) and the rubber coating allows you to maintain a solid grip throughout use. The clip is quite grippy, with the plastic attachment having several ridges that catch as it clips, and the wire design allowing it to open to almost a 45-degree angle without deforming or breaking. (I haven’t “tested” the lanyard hole, but it seems to be fine)

Everything about this pen is pretty solid. It’s easy to write with, easy to hold (it’s quite chunky and a little thicker than I like my pens, but some people prefer that and it’s better for the use case of this pen in particular), and well built. The clip and the click mechanism are both satisfying to use and the rubber is solid while lacking that sticky-feeling rubber can sometimes have. All of this comes in a very portable package at a decent price (cheaper than your average Fischer Space Pen), which makes it something ideal to look at for someone in one of the various “rugged” professions or as a reliable EDC (everyday carry) pen.

Review – INC Soft Scripts Mechanical Pencils

Posted on by
2

Pencils for the office, school, or just someone who loses their pencils a lot can get pricey, fortunately there are a lot of inexpensive options out there. But are they even worth it to try? Sure, there are a lot of inexpensive pencils, but if they don’t “pencil” there is no reason to even consider them. INC Soft Scripts are one such pencil on the less expensive side of the aisle. How well do they work?

photo-252

The design here is pretty stereotypical, with the barrel being a thin, featureless tube of black plastic that tapers at one end to a plastic lead pipe. Near this end is a rubber grip in one of a few (5 in my case) colors that is narrower in the middle and has ridges toward the end, both ostensibly to help with grip, and they succeed in being barely noticeable. On the back end is a colored plastic push-advance mechanism (that matches the grip) with integrated pocket clip and eraser holder. This bit can be removed to expose the lead-holding tube that contains 2 extra leads (for a total of 3 per pencil). The clip is nothing spectacular, with most of the necessary information on it, and fairly brittle. But I feel the entire end piece would fling off before it broke.

photo-253

Performance is what one would expect. The HB lead is middle-of-the-road, leaning toward soft, but there’s nothing particularly off about it. I personally don’t use a .7mm size but it is a fairly standard size and makes breaking less of a problem. The eraser is one of the little white ones that will get the erasing done pretty well, but will seem to disappear almost immediately. The clip is serviceable but I wouldn’t recommend using it. And, finally, the mechanism is quite solid and workable; pushing lead out and holding it in place when commanded to do so.

photo-254

They’re easily usable, but far from spectacular, pencils, with their main benefits being the rubber grip (if you happen to like those) and the fact that they are the ones at the store (if indeed they are the ones at the store). There’s nothing really there to recommend them on, but no reason to tell you to stay away, either. They will perform fine for office, school, car, or other tasks where pencils should be inexpensive because of the frequency with which they are broken or lost. In comparison to others at a similar, price it would really come down to personal preference.