Review – Up&Up Clipboard with Storage Case

Sometimes I end up reviewing things that are much closer to being “office supplies” rather than “art supplies”, but surely most things needed and used in an office will be needed by artists at some point, or otherwise have art uses. Anyway, somewhere in there is my justification for looking at what I am reviewing today: the Up&Up (Target) Clipboard with Storage Case, which is really just a handy thing no matter who you are.

The whole thing is what one would expect: a decent quality but nothing spectacular. It’s about 9½” x 13¼” and a little less than an inch thick excluding the clip. The plastic is pretty thin, translucent, and flexible. At the front there is a simple snap closure on a plastic (not in the engineering sense) hinge. The main hinge on the back is also made in this way by bending the plastic of the body in a thinner part. This makes the item easy to produce (one piece of plastic) but it will lead to structural problems over time. Fortunately, the plastic is high0enough quality that this isn’t an immediate concern. The back is basically flat but slightly recessed (half an inch in all the way around). The inside front is also pretty flat but with a small trench at the bottom for catching writing utensils and a spring clip riveted to the top. The clip is made of a few different parts with a “wire” acting as the clamping mechanism. There are pieces of plastic attached where the clip holds down the paper to reduce damage and a nice bend in the center of the wire to allow it to be lifted easily. The wire disappears into a rolled tube attached to the case inside of which is a spring that is pretty strong (enough to hurt but not seriously injure), and it does a good job of holding papers down while keeping a much lower profile than traditional clipboards.

It’s a good version, if it’s the kinda thing you need. I have a sturdier case of similar design that I’ve been trying to get a second one of, and this does the job well (but it isn’t a replacement for me). It does bend and bow (writing with it empty for more than a few words feels a bit weird) and lack proper hinges. I’m not sure it would stand up to extended use in harder conditions, but for office work it is very serviceable. The inside compartment easily holds 30+ sheets of standard office copy paper with room for a writing implement, and the clip keeps things firmly fastened to the face with minimal “denting”. If you’re in the market for a clipboard with a document storage compartment this is an inexpensive and quite serviceable option.

Review – Lihit Lab Pen(cil) Case

I might be a little bit late for the back-to-school season, but I do have a pencil case I wanted to talk about. Most pencil cases tend to be of the “dump everything in and fish it out” variety, even if the only hold a few pencils. The rarer breed is the organizational pencil case (that isn’t attached to some other “organizer”). One of the simplest, least expensive, and easiest to get a hold of versions of this is the Lihit Lab Pen Case (I can’t find a certain model name {maybe Teffa?} or number that seems to fit {maybe A7551-24?}). Is it worth it?

photo-201photo-205

The outside of the case looks pretty standard (mine’s black, but there are lots of available colors), the back is blank and the front has two almost-useless pockets with a small rubber “designed for arrangement” badge. The (double) zipper is roughly in the center of the bag (and it even has the same logo as the front badge on it) and it feels very sturdy and secure, though it has no “brand-name” on it. The hinge is made of a double layer of the same fabric as the rest of the case and shows no sign of wear from several months of use. The whole package comes in at about 8”x4½”.

photo-204photo-198

The inside is a brown version of the same color polyester fabric (regardless of outside color). On the inside of the front there are two roughly inch-wide bands to hold in pens, and on the back inside there is a simple mesh covering about half the area (to hold other items). There is also a center divider/organizational area that is strangely attached to the inside of the back half and not in the middle. I suppose that would have interfered with the hinge, but its placement near the back (really it just favoring one side) can be a problem at times. The front of this divider has another inch-wide band (higher up this time) and a thin pocket (not mesh) at the bottom, and the back has three mesh pockets, the top two being slightly larger than the bottom one.

photo-202

So the configuration of the whole case is to hold pens in the front and other art/office supply things in the back. This works pretty well, especially since the back can hold either. I have 24 pens or pen-like things in mine* and 10 (or so, paper clips are counted as one thing) other things including an eraser, Swiss Army Knife, stapler, pencil sharpener, notepad etc. It fits everything nicely and is very flexible with its organization. I was surprised with what I could fit in it (almost everything I wanted), and I’ve been carrying it around wherever I need pen(cil)s for months now and it shows no sign of stressing the material or really any wear whatsoever.

photo-199

My concluding thoughts could just be “it is the pencil case I use, and I don’t see that changing soon”. And that would be true, I really like this case, it is perfect for my exact usage scenario, but due to its popularity and the number of photos of it I see online, it looks like it could fit quite a few usage cases. It’s inexpensive relative to other cases its size (it probably helps that there is no packaging needed, but it does come with a cute little card that folds out as a representation of how to use the case), it’s durable, flexible (both in the physical and organizational sense), and it’s attractive. I’d definitely recommend it as an upgrade to the regular zipper bag most people use.

photo-233 photo-232 photo-231 photo-230

 

* Pencil Case Full Contents List

    • 2 Pentel Pocket Brushes
    • Pigma Brush
    • 2 Tombow Duos (N95, N60)
    • Liquid Accent Highlighter
    • Sharpie Twin Tip
    • Autopoint All American in Blue (Caran d’Ache Sketcher Non-Photo Blue Pencil)
    • Pigma Graphic 1
    • Pigma Micron Technical Pens (005, 01, 02, 03, 05, 08)
    • Le Pen 0.03 (003) Technical Pen
    • Tombow Mono Zero Eraser (Round 2.3, Rectangular 2.5×5)
    • Scotch Tape Roll
    • Pad of Generic Sticky Notes (3”x2”)
    • Twist Ties x2
    • Paper Clips x5 (Insulated)
    • 4 inch Ruler
    • Pentel .5 HB lead
    • Pentel Graphgear 500 .5
    • Swingline Tot 50 Mini Stapler
    • Staedtler Mars Plastic Eraser (With Plastic Case)
    • Victorinox Super Tinker**
    • Zebra F-301 (Black, Blue, Green, Red)
    • Paper:Mate Liquid Paper Correction Pen (Signo Angelic White Gel Pen)
    • Kum Pencil Sharpener

28785

Photos from Jetpens.com http://www.jetpens.com/Lihit-Lab-Teffa-Pen-Case-Book-Style-Black/pd/7665  I just had to include a photo of the "booklet" and I originally couldn't find mine.

Photos from Jetpens.com http://www.jetpens.com/Lihit-Lab-Teffa-Pen-Case-Book-Style-Black/pd/7665 I just had to include a photo of the “booklet” and I originally couldn’t find mine.

Comparison – Simply Tacky vs. Scotch Mounting Putty

When looking for some sticky tack to put that poster up on the wall without using push-pins, one usually looks for the Scotch brand. After all, they do know how to make things sticky. But one may also find Simply Tacky a (terribly named) product that does the same thing. Is it worth it to search for the right brand?

photo-43photo-49

To start off with, both items come with very close to the same amount of product. The Scotch packaging is slightly smaller, and more packed with use information and diagrams. Both are cut into four similarly-sized bars. The Scotch is the only one with a weight limit (of 1lb). Both are quite white, and are easy to pull apart and shape to stick onto a surface. Both are very grippy, with the simply tacky being a little more malleable and aggressive. It breaks into pieces more easily, though.

photo-50

As for what they can hold I’d say it’s about equal. The Scotch says it’s up to a pound, but they don’t tell you how much product to use. With a tiny, equally-sized bit of each product (weighing less than a gram) I was able to hold 70 grams (2.4 oz) easily, and I’ve held up to half a pound products stably up with enough (It will do up to a pound, but only in certain configurations of putty and object). Putting that same small piece of product up with a 7oz (198g) item, both failed fairly quickly with the Scotch maybe a little faster, but I’d chalk that up to my tests being not completely scientific.

photo-44

Overall, I’d say both products are really the same on the user’s end. Their uses are the same, price can be more or less in favor of each brand depending on where one shops, and they hold almost equally well. If you’ve got a choice in the aisle, then I’d say take the cheaper one, but it’s not worth another trip to get the right brand.

Review – Pigma Micron 05 Technical Pen

Ah, another Micron, this one is the 05 (.45mm) black version. Its main difference from other Microns of course being its nib size.

The pen body is slick but doesn’t slip when pressure is applied. Aesthetically it looks old school with its graphic design, but all the necessary info is readable and in intuitive places. The top of the cap is marked with the size, making finding the correct pen for the job from storage much easier. The overall length and weight of the pen is nice and makes it easy to handle.

Of course the main difference between this Micron and other Microns is the nib size. The 05 nib is a medium size, good for main lines and other things that should be noticed but that you don’t want to emphasize as much (assuming you’re using a broad range of pen sizes). The nib also takes considerably longer to wear out then its smaller counterparts, and one will find the ink becoming grey or stopping almost entirely before wear from normal use is noticeable.

The ink is of course the wonderful Pigma ink, which resist fading and running. It does fade after prolonged times, but not entirely and it is hardly noticeable. It also begins to fade as an eraser is rubbed over it, but this is minor and will only happen once or twice.

Overall the pen is nice and a great value. It is more of a writing size pen then the other pens in the Micron range, making it one of the most versatile of the line.

Review – Imagine Plus 110-pound Card Stock

By: Austin Smith

After paper the new thing that one would most likely move on to is card stock, in this case Imagine Plus 110-pound 8.5″x11″ card stock. This stuff is a little more “advanced” and one could actually create “finished” projects on it. “Finished” being a subjective term.

110-pound card stock is obviously much thicker and heavier then paper. It takes pencil and ink well; heavy inking and even light painting also work well. The stock does buckle under water quite easily, though, so over-inking and water-based paints aren’t recommended. And painting on anything lighter than Water-color type paper could lead to buckling.

The stock itself is smooth, with enough friction to not go sliding around. Pencil is taken and erased well. Ink is quickly absorbed. The grain is noticeable at times but rarely affects the work that is on it. Heavy ink shows through, but the likelihood of someone seeing the back is negligible.

The size of the paper being 8.5″x11″ makes it a rarely seen art surface. The size, like that of copy paper, is simply unconventional. It is a good material for people just “graduating” into “finished” artwork.

While the stock is nice and useful, most will quickly pass it up for superior art surfaces.