Review – Pigma Graphic 1

So you like to draw things a bit larger, and technical pens just don’t get big enough. You don’t want to use a brush or something similar. You may want to try the Pigma Graphic in size 1.

20131002-000542

The body is identical to a Micron body. It’s tan and smooth, with most necessary information printed on it. It has a place on the back for the cap to fit that is color coded. The cap is nice and has a metal clip. On the top it says 1 to indicate the size. The top can rub off, though, with some rough treatment. The grip section is easy, kinda small but easy to hold onto due to it being textured.

20131002-000548

The tip is felt. It comes to a point that is about 1mm. It flows nicely, laying down a nice line with no inconsistencies. The point doesn’t have much flexibility, making the line very constant with could be a plus or a minus. The ink is the same black that all Pigma pens have. It is fade and smear resistant, with some waterproofness to it. It is also acid-free, making it archival quality. In other words: it’ll last as long as your paper does. The ink is also a very nice, true, dark black. The writing experience is smooth and easy.

To sum up, the Graphic 1 is basically a larger tip Micron. It does have a different type of tip, on which the point can be more easily damaged, but the base is more secure. If you like Microns and need something bigger this is a good choice. And if you like felt-tip pens and want a higher quality one this is certainly the pen for you.

Review – Micron Red and Blue Technical Pens

I’ve talked about Microns in the past. They are basically THE technical pen. But those are just the black ones. Are the colors any good? Do they hold up to the standard and more importantly are the colors usable in any real way? How will these red and blue 02s stack up?

20130607-010852

The bodies are standard Micron bodies. Slick but still grippy. With hard to rub off, easy to read information in convenient places on them and a number on the lid. The color of the base of the pen where the cap clicks in and the ink on the top has been changed to the pen’s color for easy find-ability.

20130607-010919

The particular pen I’m using here is an 02, so it’s far from both the stiffest and weakest nibs, though it’s closer to the weaker side. It does bend a little while writing. It’s not large enough to provide much variation, either in line weight or color density. The ink is good, standard Pigma ink, archival, stands up to almost anything. It rarely bleeds and the nib seems to give off just the right amount of ink to have a fast dry time.

But on to the color. They are unmistakably blue and red. They are bright and vibrant, even on a fairly off-white paper, such as Moleskine notebooks and the like. It is brighter than any other pen or marker I have used previously. Almost unusably bright, unfortunately, as I can find no drawing scenario where it would be useful. They are good for organization, though, especially on the aforementioned off-white paper where they don’t look so jarring. They can make handy divider writings and are good for color coded text.

20130607-010911

Overall these are superb pens with little purpose. They work great, are incredibly sturdy and last quite a while, though I can find no way to work them into any drawing. Notes and technical sketches are the best place for these. Or, if you just want to have a nice pen in an interesting color.

Review – Pigma Brush

Do you like the flowing lines and moderation of a brush, but want the simplicity of a pen? The makers of Micron have a solution. The Pigma brush.

20121102-235927.jpg

 

 

The ink is the same as the Micron ink. It is a very deep black that applies smoothly to the page and rarely bleeds. It is waterproof and fadeproof archival ink. It marks just as well or better than any pen around.

 

The body of the brush is the same as the Micron’s, as well. It is slick and glossy, but fortunately easy to hold, and never once felt like it was slipping in my hand. The cap locks in place firmly and snaps haphazardly onto the back. The clip attached to the cap works das designed. The writing on the body is easy to read and rub resistant, and the identification on the cap is easy to read.

20121102-235932.jpg

 

But now for what this item is about: the brush. The brush is fairly short, no longer than the nib of the regular Microns or most other pens. The brush at its finest is super thin, and goes up to an above average pen thickness. The line range is roughly equivalent to the Micron 005 to 05 and everywhere in between. The application is buttery smooth and never splutters or splatters. Even when the brush begins running out of ink you will only begin to get a grey line instead of a patchy one. And it takes a long time to get it to run out.20121102-235937.jpg

 

For fine detail work this item is perfect, it is a perfect addition to the Pigma family and suits the audience it was created for perfectly. But it is for a specific audience. Very large or multimedia projects will find the product ill suited to create most desired effects. But that does not diminish the fact that it is a very good pen.

Review – Pigma Micron 05 Technical Pen

Ah, another Micron, this one is the 05 (.45mm) black version. Its main difference from other Microns of course being its nib size.

The pen body is slick but doesn’t slip when pressure is applied. Aesthetically it looks old school with its graphic design, but all the necessary info is readable and in intuitive places. The top of the cap is marked with the size, making finding the correct pen for the job from storage much easier. The overall length and weight of the pen is nice and makes it easy to handle.

Of course the main difference between this Micron and other Microns is the nib size. The 05 nib is a medium size, good for main lines and other things that should be noticed but that you don’t want to emphasize as much (assuming you’re using a broad range of pen sizes). The nib also takes considerably longer to wear out then its smaller counterparts, and one will find the ink becoming grey or stopping almost entirely before wear from normal use is noticeable.

The ink is of course the wonderful Pigma ink, which resist fading and running. It does fade after prolonged times, but not entirely and it is hardly noticeable. It also begins to fade as an eraser is rubbed over it, but this is minor and will only happen once or twice.

Overall the pen is nice and a great value. It is more of a writing size pen then the other pens in the Micron range, making it one of the most versatile of the line.