Comparison – Wite-Out Vs. Liquid Paper pens (Shake n’ Sqeeze, Correction Pen)

Correction fluid is quite a useful tool and an art supply in its own right on some occasions. But those bottles are hard to lug around, and the brush tips difficult to manipulate to really cover what you want. Both of the major correction fluid brands have attempted to rectify this situation with pen applicators for their product. But how well do they really work in comparison? And how do they look head to head?

Both are rather fat, pen-sized items at a little over 5 inches in length. Each is roughly cylindrical with a cap on one end, a squeezable bulge in the middle, and a posting step-down at the other end. The amount of fluid contained in each is surprisingly similar: being 7ml for the Liquid Paper and 8ml for the Bic Wite Out. But despite having only a slightly larger capacity, the Bic pen is noticeably larger in almost every way. It is a little bit longer, the tube diameter is about 125% that of the other, and the squeezable bulge extends out in two humps rather than the one of its smaller counterpart. Each one has a cap with an integrated clip, through the Bic one is translucent and more brittle-feeling than the LP which matches with the rest of the pen. The main color of each pen is an off-white, the differences of which mirror the differences in the colors of the fluids inside, with the Wite Out being a “warmer” and the LP being a “cooler” white. There’s a lot more information on the Wite Out pen, which is printed on a label wrapped around the bottom as opposed to the Liquid Paper which has just enough info printed directly on the plastic. And both pens have a strange “arrow” (triangle) pointing toward the tip molded into their plastic.

Both pens are used in the same fashion: shake it up, remove cap and any little dried bits (there always is some, no matter how well you wipe it off), press down firmly, and then write with it like it’s a pen, squeezing and pressing to increase the flow when needed (then wipe the tip off and re-cap). Both do a pretty good job, but each has its own quirks. The Bic pen is harder to start as the tip is wider and the fluid dries more rigidly. It tends to cover nicely in one stroke but the width of that stroke is a bit unpredictable, and it’s pretty poor at “writing” on its own. The fluid is basically the same as the Wite Out quick dry (or regular), drying fairly quickly and smoothly over the paper, but noticeably sitting on top of it because it is a warmer white than the average piece of paper. The Liquid Paper produces a thinner line that is easier to write with, but can sometimes require multiple, finicky applications to really cover a mistake. The fluid does start to dry pretty fast, but it quickly becomes a bit “gummy”, and if you need multiple coats and aren’t fast enough this can easily lead to unsightly bumps in the finish. If you can get it down smooth, though, it blends in much better with the paper, being closer to the cool white of office copy reams.

Both clips are serviceable when the pen is capped, with the Liquid Paper’s being a little weaker when clipping, but less brittle. As mentioned, both caps have posting stumps on the back. The Wite Out posts quite tightly and securely, while the Liquid Paper, even with no fear of falling off, seems a bit wimpy-er. Both pens have worked for me and not dried up over several months, and I happen to be in possession of another Liquid Paper pen dated 1989, which surprisingly still works (but not as well). I don’t know if that will apply to these new ones, but it’s a good omen. (The differences between the old and the new are minimal: the cap has had ridges added on the sides and a droplet shape on the clip, between the cap and body there is now a green band, that aforementioned triangle has been added, the applicator tip has been modified to add more metal, and the old has an applied label rather than material printed directly on the barrel).

Neither pen is clearly better than the other, so it mostly comes down to personal preference. The Wite Out has: a larger capacity, a thicker line, simple application, and is easier to hold. While the Liquid Paper is: smaller, easier to start, and has a much more true-to-paper tone. If you’re just looking for a correction pen, you can’t really go wrong with either, so I wouldn’t go out of my way to find one or the other. As it stands, I’ll be using the Liquid Paper in my pencil case for on-the-go stuff and the Wite Out at the desk for when I need something more fine than the sponge applicator. And I think both’ll be lasting me a pretty long time.

Review – BIC Cover-It Correction Fluid

In what seems like fate’s attempt to make my reviews less relevant immediately, I discovered another type of correction fluid in the store just after I had made a comparison review. Curiously, it’s made by BIC, who already own Wite-Out and Tipp-Ex, and it’s the same volume per-bottle as Wite Out, so I don’t know why they need another brand of white paper paint. Is it really any different?

The container is very simple (the same as Tipp-Ex it appears). The main body is cylindrical and screwing on to the top is an octagonally-faceted cap. Inside, suspended from that cap, is a bristle brush that does go down pretty far into the container, but I haven’t accurately determined just how far. The fluid itself goes on smoothly, and even with the brush there are minimal stroke lines. Dry time is decent but far from instant, and when dried the mark is matte while being on the cool side of off-white. Coverage for pencils, pens, and other mild inks is good (there is an indentation where the fluid is displaced but that’s the same with all BIC correction fluids), and it even does a decent job with permanent marker, but it starts to show its limits there.

If I were to compare it to other correction fluids I’d say that it’s almost the coverage of Wite-Out extra coverage, while being a little more on the cool side of the color spectrum. It covers better than Wite-Out quick dry and is more matte and paper-like than Liquid Paper. So it is ever so slightly different. But I’m not sure it’s different enough to warrant its production. Perhaps at store prices it might be a bit less expensive but online it is quite comparable in price to BIC’s other correction fluids, and it’s not in a very nice package. It will get the job done, and done quite well (I’d rather use it than regular Wite Out quick dry) but I don’t see why it isn’t another Wite-Out variation.

Comparison – Wite Out Quick Dry/Extra Coverage/Super Smooth

Previously I’ve compared the two major brands of correction fluid: Liquid Paper and Wite Out. Back then I didn’t take a look at the fact that Wite Out comes in a few different kinds (but there is one that is basically “regular”), so I’ll attempt to rectify that this time. Now, the various “flavors” of Wite Out do go in and out of production, with the majors being “quick dry” (regular) and “extra coverage”. I also have a bottle of “super smooth” that I picked up second hand and surprisingly still works (it’s old enough to have the previous graphic design) but that type is currently out of production. How do they compare?

Quick Dry – The standard of correction fluids and one that I’ve looked at before. Quick Dry is fairly “standard” in properties; it dries shiny and little warm in hue (yellow-ish). It is a bit finicky and tacky, sometimes making it difficult to get a smooth finish with multiple strokes. It covers regular pen, pencil and stray marks well (though it sometimes leaves a divot where the ink “repelled” it. But on darker lines like those made by Sharpies it only minimizes the effect.

Extra Coverage – The other currently (easily) available Wite Out, Extra Coverage is smoother, dries matte, and is colder (and much more white) in hue. From my experience it layers well, always being fairly flat, even minimizing visible strokes. It covers pens and permanent markers with ease (though it’s still got that weird divot displacement thing going on) but doesn’t blend in as well with the paper. And, though I did no super thorough testing, it actually seems to dry faster than the “quick dry” or at least not remain tacky as long, but that could be because my “quick dry” bottles are older.

Super Smooth – Being no longer available I have no idea what a “brand new” bottle of Super Smooth would be like, but I would hope it’s better than what I’ve got here. The bottle is old enough that it has a brush (not a sponge) applicator, and that’s not an asset since this particular type is very fond of clumping up. It’s visually similar to “quick dry” but more matte, and it doesn’t cover nearly as well (it just makes things look kinda hazy) forcing one to reapply it, causing many clumps and visible brush strokes. It dries much slower than the other two as well (maybe that’s why it lasted this long) and while it may be “smoother” in the technical sense I don’t see that as much of a positive either in the abstract or the comparison.

If I had to pick a winner it would be “extra coverage” as the only flaw I see in it is that it doesn’t quite match the color of the average sheet of paper. The “regular” “quick dry” is still a good product but one I will be using less often now. It depends on whether or not you want the correction to blend in or completely cover up the mistake. But if there is one thing to take away from this, it’s that I now understand why “super smooth” was discontinued.

Comparison – Wite Out Vs. Liquid Paper

Sometimes you make mistakes, and sometimes those mistakes need to be corrected. There are a few ways to do this, and a few brands of correction fluids to buy. Today we’ll be comparing Liquid Paper and Wite Out.

20131113-004433

What do they have in common? They both have similar size bottles (~20ml) and a stick with a sponge-wedge applicator. They are about the same size in application. Those are the only cosmetic similarities. The bottles themselves are very different. The Liquid Paper one is a bit larger with grooves on the side for grippyness, while Wite Out is just in a slim, standard-looking bottle. The Liquid Paper bottle has ridges on the cap that are supposed to make it easy to open, but instead they are slippery and difficult. They also get in the way when applying. The ridges on the Wite Out are much easier and less intrusive.

But now on to the substance itself. And there is no noticeable difference in the application process, as they have about the same viscosity and go on smooth. The brush on the liquid paper feels a bit stiffer. When dry the best I can say is Wite Out is a warm white, and Liquid Paper is a cool white. The are both undeniably white, but neither are true white. You couldn’t say they have tints, they are just warm and cool. After drying the Wite Out is easier to write on, so that is the only other consideration.

It really depends on what paper you have when using these, warm or cool paper. Yellowish will prefer warm. And though Wite Out is easier afterwards, it isn’t too much easier. So it comes down to price if neither of those things matter, as I can say that they both work quite well at what they’re designed for.