Review – Pentel GraphGear 1000

My favorite mechanical pencil is the Pentel GraphGear 500, but its MSRP is a bit close to my usual ceiling budget for new pencils, so I was reluctant to pick up its “big brother” the GraphGear 1000, until I saw one for a good deal. There are a lot of upgrades and features the 1000 has that the 500 does not, but is it worth the extra price (it usually costs)?

If I was to give an example of an over-engineered pencil, the GraphGear 1000 would be that pencil. The body starts out pretty simple, with the back half being mainly cylindrical and having all the necessary information printed on it. The front half has the (grip) section that is very lightly knurled and has 24 embedded rubber ovals to increase comfort and grip. The “cone” in front of the section that steps and tapers down to the “lead pipe” screws off, allowing the section to be removed and reoriented. A small cutout at the end of the section (near the middle of the pencil) can then be oriented over a scale of hardnesses that are printed (stickered) around the inside barrel to show the correct hardness of the pencil (mine was preset at HB). Then the cone can be screwed back down to lock in the selection. (Otherwise the inner barrel is a smooth black plastic with a matte finish that isn’t really intended to be seen).

The lead pipe usually featured on “drafting” pencils is curiously absent when one first inspects the item. It can be found by pressing the clicking mechanism on the end, at which point it pops out and is locked in place via a locking mechanism on the clip. Further clicking of the mechanism will extend the lead (or, by holding it down, allow the lead to be retracted) and pushing the top of the spring-loaded clip will release the simple locking mechanism and cause the lead pipe to quickly hide away in the cone again. The clicking mechanism cap can be removed to reveal an eraser, which can be removed to reveal lead storage. Both are friction fit with nice tolerances. And the mechanism’s cap has the lead size (.5mm for mine) printed on the top for easy reading when in a pencil cup.

How well does all of this work? Very. Everything is solid, most of the important parts being made out of metal, giving it quite a heft when compared to the 500. The clicking and locking mechanisms are smooth, quick, solid, and satisfying to use. There is no play at all when using the pencil, and it tucks away perfectly (when the lead is retracted). The HB lead it comes with is standard. It’s bordering on the hard side of HB, but it’s still pretty smooth, and from using the same variety in other pencils for quite some time I can say it is reasonably break-resistant for the .5 size. The grip is surprisingly comfortable and the rubber ovals hardly noticeable (in fact they might not be necessary, or may even make it a bit more slippery than I would prefer). The clip does a very good job of clipping (mostly because of the cutout and spring present for the locking mechanism), and it slides off with very little damage from its well-polished edges (my model has a chromed-out clip for extra smoothness and flair I guess) and it being the locking mechanism means the lead pipe will retract as soon as it’s clipped on to something, preventing damage. The eraser is the same as the one on the 500, and it does a decent job getting rid of marks while being firm enough to not disappear completely.

With that multitude of features and solidness of performance is it worth the price? Assuredly. But do you really need all of those features? Probably not. This is a great pencil and I’m really glad I was able to get one (even more glad it was at what I consider to be a really good price) but it just won’t be replacing the 500 for me (at least at the moment: only time will tell). I’m not really sure what it is about it, since it’s got a nice weight, a satisfying feel, good writing capability, and it isn’t ugly (though my model {the PG1015} is a silver color with chrome clip and button and I wouldn’t call it the most handsome pencil in my collection) but it’s just not right for me. Still, it is an astounding pencil at a very good price and if the features I’ve talked about interest you, or you want to move up in the world of mechanical pencils either as a hobby or an artist I can heartily recommend this as an excellent next step.