Tag Archives: art supply review

Review – Master Mechanic Carton Cutter

Posted on by
Reply

With so many options, one carton cutter review just wasn’t enough, and I am now back to review one that has a higher price. But does that make it better quality?

photo-127

The short answer is yes: it is better quality, but I’ll just go over a few things. The cutter has a bent and nicely shaped/joined sleeve made out of an unknown metal (probably steel), with an insert that is a folded piece of metal that will hold a razor blade. It also has a cutout “spring” that creates the tension instead of the body doing that, making it more pleasant to use. The sleeve also has a nice, easy-to-hold white paint applied, which makes it easier to see. The Master Mechanic logo that is printed on top of this looks nice but wears off easily and looks unsightly when it does.

photo-128

Use is easy and smooth, tapping (a hard surface) both to deploy and retract the blade-holding mechanism (placing the back on a hard surface and pushing firmly will deploy the blade, and doing the reverse with the blunt part of the front will retract it), but it does have a way it “likes” to go in and works better that way. The razor blades that are included are also slightly better than the cheaper knife, but in general one won’t get much use out of single-edge razor blades, which are sharp but cheap and prone to snapping or deforming.

photo-129

Is it worth it to buy a better version of such simple product? Probably not for most people. While this is a better carton cutter than cheaper ones, it isn’t really less dangerous or easier to use per-se. The fit and finish are as good as one could reasonably expect on a product this cheap; the amount of friction on deployment is constant; and the device will likely last for a long time. Still, a carton cutter isn’t a tool most people will be worrying about, and the less expensive ones would be easier to replace if they were misplaced or damaged.

Review – Office Depot Ballpoint Pens

Posted on by
Reply

Most stores have generic in-store brands or store branded products for various merchandise. That is the case here, with these Office Depot branded ballpoint pens. I don’t know what they cost originally, but they were marked down twice to 50 cents and then 3 packages for $1. Which means I picked up 30 for a $1. There are very few things I wouldn’t say are a good value for that price (I’d probably say stale gum was worth 30 pieces for $1) so it would be hard for these things to let me down. So let’s see how they perform.

photo-114

The bodies of the pens are super simple. They are round and straight with a cap on the end to hold the ink cartridge in on the back, and a slight bump (to hold the cap on) followed by a taper and then the point of the front. The cap is fairly generic with an integrated clip that works but isn’t great. They are all made of translucent plastic that matches the ink and have “Office Depot” printed on the side.

photo-115

Writing is surprisingly smooth, especially for mediums (they’re a bit broader than normal mediums I would say) and at times they can write with minimal pressure. The packages say “No skip guarantee” which isn’t true, but it wouldn’t be for any pen. It blobs after a certain amount of writing time but I don’t know a pen that wouldn’t, and it’s less than expected. They do tend to have (sometimes severe) startup issues though, especially the longer they are left capped, as do most cheap ballpoint pens.

photo-116

The colors are fairly standard office colors, nothing at all natural looking. The black is just off-black and slightly warm. The red is deep and doesn’t shade much, but still very noticeable. And the blue is quite dark, but still differentiate-able from the black except in the lowest of lights. All are essentially waterproof and dry quickly.

Overall, I’d say the pens are probably worth it. They have no frills, and likely a high margin of error. Any problems, though, and the pen can simply be tossed. They do come with wax-sealed tips, meaning they will last longer in storage, but after that they need to be used fast before they dry up. The bodies are sufficiently hardy to last easily for the life expectancy of a pen like this. The cap seals, the clip holds, and the tip writes. Everything’s functional and unspectacular. If you’re running a business where pens are needed frequently by customers or employees, or you’re just forgetful and lose your pen, these are cheap and they work until they disappear. But they won’t be impressing anyone.

Review – Expo Ultra Fine Red, Green, and Blue

Posted on by
Reply

Last week I looked at the Ultra-Fine Expo markers as a whole, and the black color specifically. This week I’ll look at the more common colors in most dry-erase ranges in this size and brand, and see how they work.

photo-52

Red- The color red is a problem with many pens, and dry-erase markers are no exception. The red goes on smoothly enough, and is one of the thinner “sticking” inks. The lines it makes are solid, but the shading and their thin-ness is more pronounced. The color is also quite washed out and pink, which I’m not really a fan of, but seems to be a theme in reds.

Green- The green is one of the thicker and smoother colors. The lines are bold and solid. But the color, while pleasant, is also washed out. While it is definitely in the green spectrum, it’s more of a sea-green or something similar.

Blue- And finally the blue. In writing characteristics, it’s more of a mixture between the other two. The lines aren’t as bold or thick, and it’s not quite as smooth as green, but more so than red. The color is the most true and least shading of the bunch. It goes well with the black, and is easy to read even from far away, though it isn’t too dark.

The first set of colors is standard, and while lackluster, they get the job done. I can’t really complain as they weren’t created with art in mind, but rather for ease of use and low odor, which they have. Next week I’ll take a look at some of the less-standard colors available in the lineup.

Review – Fiskars Cutting Mat (12×18)

Posted on by
Reply

If one is cutting things for hobby purposes for much time and one doesn’t have a table which would deal well with sharp objects, a cutting mat is really a no-brainer. But how well do the more common ones really work?

20150608-034547

Fiskars cutting mats are easy to find in many places. The particular one I use is 12×18 inches, but has a border of about a half-inch, extending the dimensions to about 13×19 but with rounded corners. Each edge is marked with a ruler that is accurate and the mat is divided into inch squares.  A couple of angles are also laid out in one corner. Most of the information on the mat is printed on a sticker on one of the sides (it’s double sided).

Being made of a fairly slick plastic, the mat can clean up easily after things like paint and plaster, but it has a texture that prevents the items being cut from sliding around. The mat is self-healing, but that really only applies to small nicks, anything larger might get a bit better, but will obviously never go away. Most things of this nature don’t inhibit the use of the mat. And it can take quite some beating from blades. If one is using this for hobby projects it will easily hold up to almost anything that is thrown at it (or rather cut on it). Obviously it has an upper limit, as it was cut into shape in the first place, but for normal personal (not industrial) use, it’ll work for a long time.

It does its job, I don’t know what else to say. Placing this on top of a table before cutting something for hobby, personal, or artistic use will almost ensure the safety of the tabletop. It works, and you can buy them from Wal-Mart.

Review – Excel #11 Hobby Knife Blades

Posted on by
1

X-Acto knives with #11 blades are an art, crafting, and modeling staple. But is the brand name worth it? Will a pack of Excel blades do just as well, or should you just buy the no-name brand from eBay if you want to save money?

photo-40

To start off with, the Excel brand 5-pack that you buy in hobby stores has a tube to store the blades in. It’s nothing special, but it gets the job done, is clear so you can see your supply, and is flexible so it doesn’t shatter.

photo-41

The blades fit securely in all hobby knife and scalpel handles that I tested, and should fit in all (unless there’s a proprietary system I don’t know about). The blades come sharp enough to cut paper, and hold their edge through cutting plastic. They dull and bend at about the same rate as X-Acto blades and can easily make it through several projects before dulling or being nicked. I’ve had no rusting yet (they come oiled), but I do keep them fairly moisture-free. The tip is “flexible” in that it doesn’t shatter and has some play (bouncing back when bent), but the point and the blade are hard enough that a single blade could take weeks of daily use (depending on the use, as plastic and metal are obviously harder than paper and cardstock).

Overall, these blades are less expensive and at least as good, if not better, than the name brand competition. They cut well, hold an edge, and resist breaking. They’re a reliable blade that is at least worth a look.